Goods Scene Troubleshooting
Ecovacs DEEBOT X8 cleaning sink fills with dirty water
Dirty water is not being removed from the station cleaning sink normally, or the station detects a full sink. The mop-washing tray, float and magnet, tank seals, or the drainage path can prevent normal detection or draining.
Issue meaning
What this issue means
Dirty water is not being removed from the station cleaning sink normally, or the station detects a full sink. The mop-washing tray, float and magnet, tank seals, or the drainage path can prevent normal detection or draining.
Start here
First checks
Confirm the mop-washing tray is installed correctly. Check that the float and its magnet are present and that the float moves freely and falls back naturally. Clean foreign material from the float and tray. Inspect the tank sealing ring and sealing plugs, reseat the tanks, then try the app’s auxiliary draining function. If needed, empty and clean the tray, reconnect station power and run self-cleaning again.
Inspection
Area to inspect
Mop-washing tray, float and magnet, tank seals, drainage path and station drain function.
Goods Scene guidance
What to do next
Clear the tray and float and verify normal auxiliary draining before diagnosing the station pump, drainage hardware or water-level detection components.
Practical guidance is kept separate from manufacturer wording.